Skip to main content
Sump chamber set into a basement floor with the pump installed
Two sump chambers with pipework in a new basement floor

Request a call back

Sump Pump Systems & Services in Richmond

  • Team qualified to CSSW standard
  • Twin-pump options with battery back-up
  • Pump servicing and call-outs
  • Serving Richmond TW9

Is a sump pump worthwhile?

Sump pump installation in progress within a basement floor
Standing water across a basement floor following heavy rain

A look at our projects

Exposed damp walls during work on a basement conversion
Excavation and structural steel during basement floor lowering

Considering a conversion

Repeated flooding and a musty smell: when a pump needs a membrane

A Type C waterproofing system

How a cavity drain membrane and pump work together

Diagram showing Type C basement membrane, drainage channel, sump, pump and discharge
1. Membrane across walls and floor

The studded plastic cavity drain membrane creates an air gap a few millimetres wide. Seeping water travels down that gap without reaching the newly finished rooms.

2. Channels around the perimeter

Set into the floor at the foot of the walls, drainage channels gather the water and direct it by gravity towards the sump chamber.

3. Automatic sump pump

As water rises inside the chamber, a float switch activates the pump. Pipes then carry the discharged water out of the building.

When walls are wet

Wet walls after rain: pairing membranes with pumps

Basements for everyday use

A habitable basement needs waterproofing and pumps

Protecting the walls and floor

Waterproofing forms a watertight barrier to keep moisture from entering the basement.

Managing water with drainage and pumps

By reducing pressure against the barrier, drainage and pumps help prevent constant strain and leaks developing after a few years.

Thinking about a basement gym?

Planning the conversion and extension properly from the outset helps avoid later issues with room size, ceiling height or Building Regulations.

A joined-up project team

We work with our architects and engineers to plan the conversion, pumps and waterproofing as a single project.

From design through to finishing

How we take a basement project from design to finish

Cavity drain membrane lining basement walls and floor around the sump chamber
Membrane laid around the sump
Sump chambers framed within a reinforced basement slab before pouring
Sump chambers set in the slab
Twin sump pumps with cabling positioned inside their chamber
Twin pumps with battery back-up
Finished basement room showing the floor hatch for sump access
Finished basement with sump access

The people behind your project

Who is involved when converting a basement that floods?

Neighbouring properties

The Party Wall Act 1996 and notifying neighbours

You may have to notify neighbours formally under the Party Wall etc. Act 1996 before work begins if you share a wall or excavate close to their building. Excavating a sump pit, installing perimeter drainage or lowering a basement floor can bring the work within the Act.

If excavation for a sump, drainage or floor lowering is within 3 metres of a neighbouring building and extends below the base of its foundations, the Act applies.

It also applies if the excavation is within 6 metres of the neighbouring building and deep enough to cut a line drawn down at 45 degrees from the bottom of their foundations.

For terraced and semi-detached homes, the Act also covers work to the party wall itself, including setting beams into it or underpinning its foundations.

The building owner must give the neighbour official notice at least one month before excavation under Section 6, or two months before party wall work under Section 2. An excavation notice needs plans and sections showing the location and depth, including the sump pit where relevant. It lapses if work has not begun within 12 months. Our engineers can produce the drawings.

A neighbour has 14 days to reply. Consent allows the work to proceed, though photographing existing cracks beforehand is still worthwhile. Dissent or no reply creates a dispute requiring the appointment of party wall surveyors.

Rather than stopping the project, a surveyor ensures the work is carried out safely. They document the neighbour’s property in a Schedule of Condition and issue a Party Wall Award covering matters such as noisy excavation hours and protection for the neighbouring property.

Usually, the building owner pays for their surveyor and the surveyor their neighbour may appoint. If both parties agree on one Agreed Surveyor, the cost is significantly reduced. This is general information rather than legal advice; ask a party wall surveyor to confirm what applies to your property.

Water discharge and keeping the pump operational

Battery back-up alongside a sump pump control panel
Sump pump controls and alarm mounted on a basement wall

Keeping sump pumps serviced

Damp odours and mould

A musty smell near your pumps? Arrange a service

Your questions answered

Sump pump installation: common questions

At the survey, we assess water entering during heavy storms, the height and distance to the discharge point and how critical it is to keep the space dry. We install twin pumps when flooding is frequent or the basement is lived in.

Without mains power, the pump stops, potentially just as a storm brings more water. A generator or battery back-up (UPS) can keep it operating; a high-level alarm alerts you if chamber water rises too far.

Our recommendation is twice yearly, in spring and autumn. BS EN 12056-4 guidance suggests servicing homes at least once a year, twice yearly where flooding is a risk and four times yearly for commercial premises.

We establish the discharge point during the survey. Ideally, water goes to a foul or combined sewer via a trapped gulley that keeps smells out, or to a surface water drain fitted with a non-return valve to prevent backflow in heavy rain.

No. Pumps remove water collected at the lowest point, not moisture entering through walls. A dry, usable room also needs waterproofing, such as a cavity drain membrane and perimeter channels working with the pump.

Usually around 80–100 cm deep, the pit sits at the basement’s lowest point. Because digging beside footings alters ground stresses, a structural engineer checks its position. The Party Wall Act may also apply near a neighbour’s building.

Possible causes include standing water in the chamber, a dried-out gulley trap, a failed non-return valve or a pump overloaded by a blocked strainer. Arrange an urgent service so we can disinfect and clean the chamber, test the pump and restore the smell barrier.

To arrange a survey online or speak with our specialists, call 020 8432 3350 or 07720 752231. We provide new installations, servicing for existing pumps and emergency call-outs.

Free survey

Arrange a sump pump survey in Richmond

  • Assessment of groundwater and leaks
  • A clear quote in writing
  • Guarantee backed by insurance

Tell us about your basement

The local approach

What we assess in Richmond basements

Service area

Sump pump installs and servicing near Richmond

Richmond is about 11 miles from our base in Croydon, typically 55–80 minutes by road depending on traffic. Richmond is in Richmond upon Thames, Greater London, in the TW9 postcode district. Within TW9 we visit homes in Richmond itself and in Kew, North Sheen and Richmond upon Thames. Rail links include Kew Gardens, Richmond and North Sheen stations. From Richmond we also cover Twickenham, Kingston upon Thames and Hounslow. The district is almost entirely urban in the 2021 rural-urban classification. Richmond upon Thames council is the planning authority for the area. We cover all of the roughly 539 residential postcodes in TW9. Give us your postcode and we will book a survey at a time that suits you.

Local questions

Sump pump questions from Richmond

Will an older house in Richmond need a new damp-proof course?

Not always. Around 49% of homes in Richmond were built before 1919 and 15% between 1919 and 1939, when damp-proof courses were often slate, bitumen or missing altogether. Many still work, and damp is often caused by bridging, raised ground or leaks instead. A survey shows the real cause before any treatment is recommended.

Can a damp basement or cellar in Richmond be made dry and usable?

Usually, yes. The usual approach follows British Standard BS 8102: a cavity drain membrane that lets water drain to a sump, cementitious tanking applied to the walls, or both combined. Which suits a property in Richmond depends on the ground, the walls and how the space will be used. We explain the reasons for the choice in writing.

Do I need council permission for damp or waterproofing work in Richmond?

Usually not for an ordinary house, but Richmond has conservation areas such as Beresford Avenue and around 233 listed buildings. Most changes to a listed building need listed building consent from Richmond upon Thames council, and in a conservation area new render or other outside changes may need planning permission. Check with the council before work begins.

Can damp in my Richmond flat come from a neighbouring flat?

Yes. Around 49% of homes in Richmond are flats or maisonettes, and leaks from a flat above, shared walls and failed external render are common causes of damp. The source has to be found first, and the repair may involve the freeholder or managing agent. A survey report sets out who is responsible for which repair.

Why is there black mould in my Richmond home?

In Richmond's older solid-wall homes, cold walls make condensation more likely. Moisture from cooking, showers and drying clothes settles on the coldest surfaces, and mould follows. Better ventilation, such as extractor fans or a positive input ventilation unit, usually helps. A survey rules out a leak or defect first. Wiping the mould away treats the symptom, not the cause.

Which parts of Richmond and the TW9 area do you cover?

We cover the whole TW9 postcode district, including Kew, North Sheen and Richmond upon Thames, and nearby Twickenham, Kingston upon Thames and Hounslow. Richmond is about 11 miles from our base in Croydon. Tell us your postcode and we will confirm the visit. Every street in TW9 is covered, from the centre of Richmond to the edges of the district.

About the area

Homes and housing types in Richmond

The TW9 postcode district around Richmond has about 11,000 homes on the Valuation Office Agency council tax list. Around 49% of them were built before 1919, 15% between 1919 and 1939, 13% from 1945 to 1972, 9% from 1973 to 1999 and 14% since 2000. In the 2021 Census the most common homes were flats or maisonettes (49%), terraced houses (27%) and semi-detached houses (18%). That makes Richmond mainly a place of pre-war housing.

These figures point to the damp problems most likely in Richmond. Pre-1919 solid walls often lack a working damp-proof course and let rain through worn pointing. Because so many homes are flats, damp often comes from the flat above, a party wall or shared guttering, and tracing the source comes before any repair. Cellars and basements in Richmond face water pushed in from the surrounding ground, so the choice between a cavity drain membrane and tanking is made only after a survey.

There are 16 conservation areas in or near Richmond, including Beresford Avenue, Burlington Avenue and West Park Road and Central Richmond. Around 233 listed buildings stand in and around Richmond, 11 at grade I and 27 at grade II*, according to Historic England. Listed buildings need consent from Richmond upon Thames council for most changes, including damp treatment, and outside work in a conservation area may need planning permission.

Fungi and mould in damp basements

Damp staining and mould visible across a basement wall

Recognise the signs

Help keep your basement dry in any weather

  • CSSW-qualified specialists
  • 10+ years’ experience each
  • 10-year workmanship guarantee
  • QANW insurance backed guarantee
  • Transfers if you sell your property
  • Surveys in Richmond TW9
QANW logo – the UK’s leading provider of insurance backed guarantees

Our service area

Sump pump services in Richmond and nearby