Leave your details and our team will get in touch.
Request a call back
Sump Pump Systems & Services for Hawkinge
Keep basement floodwater from taking hold.
For a basement at risk of flooding, professional sump pump installation offers cost-effective protection. Rising rainwater or groundwater enters a chamber beneath the floor; the pump automatically moves it outside before the floor floods or stored belongings are damaged.
Crystal Damp Proofing & Basements Ltd designs, installs and services sump pump systems for homes and commercial properties in Hawkinge CT18. Options range from a single pump to twin pumps with battery back-up.
Signs your basement needs a pump
Water rarely arrives without warning. Call us if you notice:
- Standing water on the floor after heavy or prolonged rain.
- Tide marks where the walls meet the floor.
- A damp, musty smell that ventilation does not shift.
- Wet walls that darken after every storm.
- Plans to convert a basement that has flooded before.
Is a basement sump pump worth installing?
Yes. Although a sump pump cannot prevent water entering through basement walls, it clears accumulating water before the floor floods. If the space will be a living area, gym, fitness room or office, pumping alone is insufficient: combine it with proper waterproofing.
Has your basement flooded after rain?
A floor left under water after rainfall can mean groundwater has risen above floor level, or rainwater is entering the building faster than it can soak away. The quickest and most effective way to prevent another flooded floor is an automatic pump in a chamber at the basement’s lowest point. If your cellar has flooded, see what to do first.
Recurring floods and damp smells: combining a pump with a membrane
A basement conversion affected by active leaks or repeated flooding needs a complete waterproofing system. Without one, new floors and walls will soon be ruined and mould harmful to health will develop in the room.
An enduring musty smell indicates water and vapour continually entering the walls, leaving humidity too high and moisture within the pores of brick or concrete. In a repeatedly flooded basement, groundwater pressure can push rigid tanking applied internally (Type A) off the wall when used alone. We recommend a cavity drain membrane and sump pump in these conditions.
For converted basements, the most effective solution is drained protection: Type C waterproofing under BS 8102. It manages water, collects it safely and directs it outside rather than relying on force to hold it back.
The Type C approach
How the cavity drain membrane works with the pump
Rather than resisting incoming water, the cavity drain membrane and pump operate together to collect it and provide a controlled path out of the building.

The result: because the membrane, drainage and pump remove water before it evaporates into the room, the basement stays completely dry and the damp smell disappears. Read about the cavity drain membrane.
When basement walls are wet
Rain-soaked walls need more than a membrane
When walls become wet, water is pressing sideways against the building through the ground. A drainage membrane cannot act as a waterproof layer by itself; keeping the walls dry requires a complete system.
Protection from the outside
If the foundations can be excavated around:
- Vertical waterproofing: we apply appropriate vertical waterproofing, including thick bituminous coatings.
- Protection: a studded membrane shields the coating as the ground is backfilled.
- Perimeter drainage: pipes along the foundation base take water from the walls into the sump; the pump then sends it away from the house.
Protection from the inside
If digging outside is not possible:
- Type C membrane: we fit a cavity drain membrane across the interior walls and floor.
- Drainage channels: channels around the perimeter gather water flowing behind the membrane.
- Sump and pump: collected water reaches the sump through the channels before the pump discharges it outside.
Making a basement habitable
A dry, habitable basement needs both
A basement intended as a gym, office or entertainment space needs waterproofing alongside its pumps. Even when a pump runs non-stop, walls without waterproofing remain damp, allowing harmful mould and fungi to grow and plaster to come away.
Design through completion
How we take your project from plans to finished room
Our complete service covers design through to the finished room, avoiding the risk of mistakes between separate trades:
- Survey and finding the leaks: we examine groundwater levels and the walls, identify water entry points and select suitable membranes, for example 8 mm on walls and 20 mm on the floor.
- Designing the Type C system (BS 8102): our CSSW-qualified surveyors set drainage channel falls and choose pump capacity to account for water entering during heavy storms.
- Turnkey installation with back-up: we fit membranes and excavate the sump chamber. Where floods recur frequently, we install twin pumps with battery back-up for power cuts during storms.
- Building work and finishing: after protecting the basement, we build new walls using moisture-resistant boards on a metal frame or plywood boards on battens, then carry out the final finishing work.




Specialists involved in your project
Who plans a conversion where the basement floods?
Building Regulations govern basement conversions involving active leaks and a drained (Type C) system. The specialists involved have roles at different stages. Alongside our own architects and structural engineers, we plan the conversion, waterproofing and structure as a single project.
Structural engineer
Essential, for Building Control approval
- Lowering the floor: for planned excavation, the engineer calculates safe support for load-bearing walls through underpinning.
- The sump pit: around 80–100 cm deep at the basement’s lowest point. The engineer checks its position against the stability of the foundations.
- Channels cut into the floor: structural checks are also needed when cutting drainage channels into the slab.
Architect
Optional, but highly recommended
- Planning permission: the architect prepares drawings for the council where a lightwell, new basement windows or a separate entrance is planned.
- Fire escape: a safe route out of a habitable basement is required by Building Regulations (Approved Document B).
- Layout and services: the design includes mechanical ventilation, essential for damp basements.
Waterproofing designer qualified to CSSW standard
Required by BS 8102:2022
- The right qualification: include a Certificated Surveyor in Structural Waterproofing (CSSW) on the design team; architects and engineers rarely hold this qualification.
- Our own team: holding CSSW qualifications means we design the pump and membrane system ourselves.
- Responsibility: we are responsible for the system working under groundwater pressure.
Considering neighbouring properties
When the Party Wall Act 1996 requires neighbour notification
Is my basement project covered by the Party Wall Act?
You may need to formally notify neighbours under the Party Wall etc. Act 1996 before starting if your house shares a wall with theirs or excavation is near their building. Basement excavation for the sump pit, perimeter drainage or a lowered floor often falls within the Act.
Excavation and the 3-metre rule
If you excavate within 3 metres of a neighbouring building and the sump, drainage or lowered floor goes below the bottom of its foundations, the Act applies.
Excavation and the 6-metre rule
It also applies if the excavation is within 6 metres of the neighbouring building and deep enough to cut a line drawn down at 45 degrees from the bottom of their foundations.
Does work to a shared wall count?
For terraced or semi-detached houses, the Act also covers the party wall itself, including setting beams into the wall or underpinning the foundations beneath it.
What is involved in serving a Party Wall Notice?
As building owner, you serve official notice on your neighbour at least one month before excavation under Section 6, or two months before work on the party wall under Section 2. Excavation notices contain plans and sections showing the location and depth of the work, such as sump pit depth. A notice lapses if work does not start within 12 months. Our engineers can prepare the drawings.
What if my neighbour consents or objects?
Your neighbour has 14 days to respond. If they consent, work may proceed, though photographing existing cracks in their property beforehand remains worthwhile. If they dissent or fail to respond, a dispute arises and party wall surveyors must be appointed.
What is the party wall surveyor’s job?
Rather than preventing the project, the surveyor ensures work is carried out safely. They document the neighbour’s property beforehand in a Schedule of Condition and issue a Party Wall Award addressing matters such as hours for noisy excavation and protection of the neighbouring property.
Who covers party wall surveyors’ fees?
Normally, the building owner pays both their own surveyor and the surveyor their neighbour is entitled to appoint. Agreeing on a single Agreed Surveyor for both sides significantly reduces the cost. This is general information, not legal advice: properties differ, so confirm the details with a party wall surveyor.
Discharging water and keeping your pump operational
Where should the water go?
Selecting the discharge point carefully helps keep smells and backflow out of your home:
- Into a foul or combined sewer: the best option, with a trapped gulley to prevent sewer gases and smells returning to the basement.
- Into a surface water drain: connect directly with a non-return valve to prevent rainwater flowing back into the basement in a downpour.
Back-up protection
Violent storms cause most basement flooding and often coincide with power cuts. We therefore recommend:
- Battery back-up (UPS) or a generator: supplies power so the pump continues operating during a power cut.
- A second, back-up pump: in a twin-pump arrangement, it starts when the first pump fails or water enters very quickly.
- A high-level alarm: alerts you straight away when water in the chamber rises beyond its intended level.
Maintaining your sump pump system
Our recommendation is to service sump pumps twice a year, in spring before the thaw and autumn ahead of heavy rain. Pumps that operate often, or serve commercial buildings, may warrant more frequent visits. We also provide aftercare and emergency call-outs. A service covers:
- Cleaning the sump chamber: we lift out the pump and remove sand, silt and debris that could obstruct it.
- Cleaning the inlet strainer: we remove accumulated material from the pump intake.
- Checking the float switch: we verify that it moves freely without catching against cables or chamber walls.
- Testing: we add clean water to the chamber and confirm the pump switches on automatically and empties it quickly.
- Checking the discharge: we inspect the non-return valve and confirm the gulley trap contains water.
We provide a written record of the checks after each visit, helping you keep the system and its warranties in order.
Musty odours and mould
Musty smell around the pumps? Book a service now
Treat a mouldy, damp odour in the pump room or on floors above as an urgent warning: mould spores are already growing in the building, and drainage or ventilation is not working properly.
What can cause the odour?
- Stagnant water in the chamber: if a badly set float, for example, prevents complete emptying, silt, grease and bacteria accumulate, cause smells and release moisture into the house.
- Dry gulley or failed non-return valve: either can let sewer gases and smells return to the basement.
- An overloaded pump: when the strainer or impeller is blocked, the pump cannot keep pace and humidity increases sharply.
During an urgent service, we isolate and lift out the pump, remove water and silt, disinfect and clean the chamber, clean the float and impeller, test the pump, refill the gulley trap and check the smell barrier. We then identify the mould source and treat it with a professional fungicide. Merely opening windows at this point spreads spores through the house.
Why can you smell it on the floors above?
Mould in a damp basement can affect the rest of a house, even across three storeys:
- The stack effect: as warm air rises and leaves through the roof or ventilation, it pulls basement air carrying mould spores upwards through floor gaps, service openings and doors.
- Capillary rise: like a candle wick, wet basement walls can draw water upwards, sometimes to the ground or first floor, carrying damp, salts and mould. Learn about rising damp.
A musty smell upstairs indicates spore concentrations are already high. This can cause allergies, asthma, recurring infections, headaches and tiredness, particularly in children and older people.
More ways we can help
Complementary services for your sump pump system
As well as pumps, we provide basement waterproofing, basement conversions and cellar waterproofing to create a complete system.
Waterproofing for Basements
Pumps with membranes and tanking.
Basement Waterproofing Technology
Compare Type A with Type C.
Converting and Waterproofing Basements
Transform a damp cellar into living space.
Cellar Waterproofing
Drying and protecting older cellars.
Retaining Wall & Foundation Waterproofing
Protection outside before ground is backfilled.
Rising Damp
Ground moisture travelling upwards.
Black Mould and ISO-Therm Membrane
Solutions addressing mould and condensation.
Basement Floor & XPS Insulation
Keeping floors below ground dry and warm.
Helpful answers
Questions about sump pump installation
How is the appropriate pump chosen?
During the survey, we size the system by considering water entering in heavy storms, the height and distance to the discharge point, and how critical the space is. For frequent flooding or a basement used as living space, we fit twin pumps.
What if my sump pump loses power?
When electricity fails, a mains pump stops, potentially just as a storm brings the most water. A generator or battery back-up (UPS) keeps it running; a high-level alarm warns if chamber water rises above its intended level.
When should I have my sump pump serviced?
We recommend spring and autumn servicing, twice a year. Guidance in BS EN 12056-4 suggests at least yearly visits for homes, twice yearly where flooding is a risk and four times a year for commercial premises.
What discharge points can the pump use?
Ideally, water goes into a foul or combined sewer through a trapped gulley to keep smells out. Alternatively, a surface water drain fitted with a non-return valve prevents backflow during a downpour. We agree the discharge point at the survey.
Can a sump pump keep basement walls dry?
No. It removes water collecting at the lowest point, but cannot prevent water passing through walls. A dry, usable room also needs waterproofing, such as a cavity drain membrane with perimeter drainage working alongside the pump.
Does a structural engineer check the sump pit?
Usually around 80–100 cm deep, a sump pit sits at the basement’s lowest point. Because excavation near footings changes stresses in the ground, a structural engineer confirms its position. The Party Wall Act may apply near a neighbouring building.
What makes a pump room smell musty?
Possible causes include stagnant chamber water, a dry gulley trap, a failed non-return valve or an overloaded pump with a blocked strainer. Arrange an urgent service: we disinfect and clean the chamber, test the pump and restore the smell barrier.
How can I arrange a survey, service or call-out in Hawkinge?
Arrange your survey online or speak to our specialists on 020 8432 3350 or 07720 752231. We install new systems, service existing pumps and attend emergency call-outs.
Survey at no charge
Arrange your Hawkinge sump pump survey
For a basement taking in water or a pump due for servicing, arrange a survey or speak to our specialists on 020 8432 3350 or 07720 752231.
07720 752231
Describe your basement to us
Please complete the fields marked *. We will get in touch to arrange your survey when we receive your details.
Assessing each property
Our first checks for basements in Hawkinge
Before recommending a pump around Hawkinge, we assess the particular basement rather than assuming its surroundings tell us how it behaves. That applies whether the space is a cellar, sits beneath an extension or belongs to a commercial property.
At the property, we establish where water enters, whether it appears after rain or remains present, and where the basement floor is lowest. We also assess the available discharge point and power for the pump and its back-up. These observations guide chamber size, the number of pumps and the discharge route.
Fungi and mould in a wet basement
Basement humidity remaining above 60–70% allows two main groups of organisms to develop: moulds and wood-destroying fungi.
- Dry rot (Serpula lacrymans): the most destructive building fungus can transport water many metres along its strands, crossing dry masonry, destroying timber and weakening mortar.
- Wet rot (Coniophora puteana): develops in materials that remain wet or flooded, causing brown rot.
- Aspergillus: commonly seen in damp basements as black or dark brown growth.
- Penicillium: appears as fluffy patches of greenish growth.
- Black mould (Stachybotrys chartarum): grows on wallpaper, plasterboard and damp insulation and is considered one of the most toxic household moulds. See our black mould service.

Understand the warning signs

Protect your basement through changing weather
Our 5-star Google rating makes us proud. Read our reviews, arrange a survey or speak with our specialists on 020 8432 3350.
Qualified Specialists & a 10-Year Guarantee
Our family-run team holds CSSW qualifications, with a minimum of 10 years’ experience each. We back our waterproofing work in Hawkinge with a 10-year guarantee covering workmanship, plus a QANW Insurance Backed Guarantee that transfers to the new owner if you sell your property. The pumps we install carry the pump manufacturer’s warranty, usually up to 2 years, and we keep them in good working order with regular servicing.
See What Our Clients Say
We are proud of our 5-star Google rating. Whether you need a new sump pump system, a service or an emergency call-out, book a survey or call our specialists on 020 8432 3350 or 07720 752231.
Our service coverage
Installing sump pumps around Hawkinge
Crystal Damp Proofing & Basements Ltd installs and services sump pumps in Hawkinge and nearby areas, including Foord, Folkestone, Hythe and St Radigund's. Choose an area below to visit its local page.










