Skip to main content
Twin spray machines and a hopper set up to spray tanking slurry onto basement walls

Request a call back

Spray-Applied Basement Waterproofing in Whitton

  • CSSW-qualified team
  • Seamless, joint-free coating
  • 10-year guarantee
  • Whitton TW2

Spraying and retaining walls: two jobs that work together

Concrete basement shell with steel frame, ready for waterproofing

Retaining walls

Spray or hand-applied?

When is spray-applied waterproofing the best choice?

Hard-to-reach surfaces

Corners, recesses and areas behind services

Porous structures

Brick, stone and concrete filled deep into the pores

Where accuracy matters

Large or uneven walls with no thin or missed areas

Large areas & external walls

An even layer applied quickly, inside or outside

How we carry out the work

Spray-applied waterproofing, step by step

1

2

Basement walls stripped back to bare brick before waterproofing

3

4

5

Spray pump, hoses and buckets of tanking slurry on a basement floor
First sprayed coat of tanking slurry on an old stone wall
Operative in protective clothing spraying tanking slurry onto basement walls

6

Finished, smooth coat of tanking slurry on a basement wall
Lower external walls of a house prepared for spray-applied waterproofing
Spray-applied waterproofing on the lower external walls and plinth of a house

Inside & outside

Inside and outside the building

Finished spaces

A dry space that adds value to your home

Bright open-plan living area on a dry lower ground floor
A finished, dry living space
Dry living room with sofa, fireplace and TV after waterproofing
A dry living room after waterproofing
Gym equipment in a dry, finished basement
A dry basement used as a gym

Materials

Trusted manufacturers & high-quality materials

Wykamol logo

NEWTON

Delta Membranes logo
Biokil logo
Mapei logo

What our clients say

Feedback from Crystal Damp Proofing & Basements clients, as published on our testimonials page.

I would always recommend Lukasz as their Crystal Injection system finally resolved the problem with rising damp. Need to mention that previous cream injections failed and the previous contractor refused responsibility to return. After 12 days walls are nearly dry as pepper!

Louise

Don’t often give reviews, but after several botched attempts to fix the damp problem in our flat by other companies and spending a considerable amount of money, Lucasz finally managed to solve the problem. There were multiple issues & Lukasz sorted them all out, from a dodgy DPC, damaged render, installing additional ventilation etc. So big thanks for finally getting rid of all that horrible black mould.

Oliver Ambrose

I am really happy with the work they did for our 4-bed house in South London. I will certainly be recommending Crystal Damp Proofing & Basements Ltd to anyone who has problems with condensation or damp!

PJ

Questions

Spray-applied basement waterproofing: FAQs

It is tanking slurry, a polymer-modified, cement-based waterproofing mortar, applied to walls and floors by machine instead of by brush or trowel. It bonds permanently to the surface and forms one seamless barrier that resists moisture and water pressure from the ground. In BS 8102:2022 it is a Type A barrier system.

The material does the same job, but spraying applies it faster and more evenly, drives it deep into pores and gaps, and leaves one continuous coating with no joints. On large, uneven or hard-to-reach walls, that removes the thin and missed areas where water usually gets in.

We spray at least two coats of slurry, around 2–3 mm in total. The second coat is applied once the first has set, so the two layers build one continuous barrier.

Yes. Tanking slurry stays breathable and can be plastered or tiled over once it has cured. Shelves, sockets and other fixings should be planned so that the barrier is not punctured, and we will advise on this before the room is finished.

Yes. Where the work can reasonably be done from the outside, we spray tanking and render systems onto the lower walls and plinths of buildings to protect them from rain, splashback and ground moisture. Where damp is rising from the ground, we combine this with a damp proof course.

It depends on the wall and how the space will be used. After preparing the walls and floor slab, we choose either a spray-applied system or a combination with a cavity drain membrane, designed to BS 8102:2022 for that building.

We back our work with a 10-year workmanship guarantee and a QANW Insurance Backed Guarantee that transfers to the new owner if you sell your property. The waterproofing materials also carry a 10-year product warranty.

Book a survey online or call our specialists on 020 8432 3350 or 07720 752231. We will find where water is getting in, check the walls and recommend the right spray-applied system.

Free survey

Book a survey for spray-applied waterproofing in Whitton

  • Walls and leaks surveyed
  • Clear written quote
  • Insurance-backed guarantee

Tell us about the walls

Local context

Damp basement walls around Whitton: what we check first

Wall material

Where water enters

Inside or outside

Room to work

Getting to you

Spray-applied waterproofing across TW2

We travel to Whitton from our base in Croydon, about 12 miles away; the drive usually takes 60–90 minutes depending on traffic. The TW2 postcode district sits in Richmond upon Thames, Greater London. Nearby, we also work in Twickenham, Hounslow, Teddington and Hampton. The district is almost entirely urban in the 2021 rural-urban classification. Planning matters here are handled by Richmond upon Thames council. The district has about 548 residential postcodes, and we cover every one of them. In Whitton we carry out damp surveys, damp-proofing, condensation control and basement waterproofing. Give us your postcode and we will book a survey at a time that suits you.

Ask the specialists

Spray-applied waterproofing: Whitton questions

Does my older Whitton home need a new damp-proof course?

Not necessarily. About 19% of homes in Whitton predate 1919 and 56% date from 1919 to 1939, a time when damp-proof courses were slate, bitumen or absent. Many still work, and damp is often caused by bridging, raised ground or leaks instead. A survey shows the real cause before any treatment is recommended.

Can a damp basement or cellar in Whitton be made dry and usable?

Yes, in most cases. The usual approach follows British Standard BS 8102: a cavity drain membrane that lets water drain to a sump, cementitious tanking applied to the walls, or both combined. Which suits a property in Whitton depends on the ground, the walls and how the space will be used. Ventilation and drainage are part of the design, not an afterthought.

Do I need council permission for damp or waterproofing work in Whitton?

Usually not for an ordinary house, but Whitton has conservation areas such as Belmont Road and around 11 listed buildings. A listed building needs listed building consent from Richmond upon Thames council for most changes, and outside work in a conservation area, such as render, may need planning permission.

How can I tell what kind of damp my Whitton home has?

Condensation shows as mould around windows and in corners and gets worse in cold weather. Rising damp leaves a tide mark low on the wall, often with salts, while penetrating damp follows a defect such as a leaking gutter and gets worse after rain. A survey tells them apart. Treating the wrong cause wastes money, so the diagnosis always comes first.

Why is there black mould in my Whitton home?

In most homes black mould is a condensation problem. Moisture from cooking, showers and drying clothes settles on the coldest surfaces, and mould follows. Extractor fans or positive input ventilation usually reduce it. A survey rules out a leak or defect first. Cleaning alone only treats the symptom.

Do you cover my part of Whitton?

Yes. We cover the whole TW2 postcode district and nearby Twickenham, Hounslow and Teddington. Whitton is about 12 miles from our base in Croydon. Give us your postcode when you get in touch and we will arrange a survey. There is no need to be on a main road or near a station. Questions before booking are always welcome.

The local picture

Housing in Whitton at a glance

Valuation Office Agency records show about 12,800 homes in the TW2 postcode district, which covers Whitton. By age, around 19% date from before 1919, 56% from the interwar years of 1919 to 1939, 12% from 1945 to 1972, 7% from 1973 to 1999 and 6% from 2000 onwards. According to the 2021 Census, homes here are mostly semi-detached houses (40%), terraced houses (30%) and flats or maisonettes (25%). That makes Whitton mainly a place of pre-war housing.

What this means for damp in Whitton: In terraced streets, damp often enters at the front where pavements have been raised, or through a shared wall with a neighbour. Houses from 1919 to 1939 often have suspended timber floors and early cavity walls; blocked air bricks and paths built up above the damp-proof course often cause damp and timber decay. Cellars and basements face water pushed in from the ground around them, so a membrane or tanking system is chosen only after a survey.

There are 8 conservation areas in or near Whitton, including Belmont Road, Hamilton Road and Oaklands Estate. Historic England's list includes around 11 listed buildings in and around Whitton, all at grade II. Work on a listed building, such as a new damp-proof course or tanking, usually needs listed building consent from Richmond upon Thames council; in a conservation area, changes to the outside such as new render may need planning permission.

Planning spray-applied waterproofing in Whitton

Cellar with stripped brick walls and a stair, prepared before tanking

Before we spray

Let us take away your worries about damp

  • CSSW-qualified specialists
  • 10+ years’ experience each
  • 10-year workmanship guarantee
  • QANW insurance backed guarantee
  • Transfers if you sell your property
  • Surveys in Whitton TW2
QANW logo – the UK’s leading provider of insurance backed guarantees

Areas we cover

Spray-applied basement waterproofing in Whitton and nearby