Leave your details and our team will get in touch.
Request a call back
Croydon Spray-Applied Basement Waterproofing
Sprayed tanking slurry forms a seamless, watertight barrier quickly.
Damp on basement walls or ceilings may mean the original damp proofing was badly installed or has deteriorated. If water is entering from the ground around your home, paint will not solve it: the wall needs an unbroken waterproof barrier.
For homes in Croydon CR0, Crystal Damp Proofing & Basements Ltd provides spray-applied basement waterproofing. Our CSSW-qualified team applies tanking slurry by machine to create a single coat without weak spots, working inside or outside wherever access reasonably allows.
Understanding tanking slurry
A polymer-modified, cement-based mineral mortar, tanking slurry waterproofs walls and floors. Thin coats totalling 2–4 mm bond permanently to the surface, forming an unbroken barrier against ground moisture and water pressure. Under BS 8102:2022, this is a Type A barrier system.
The coating remains breathable, suits masonry and concrete, and can be tiled over.
- Flexible slurry bridges hairline cracks while allowing for minor structural movement.
- Rigid slurry works well on solid surfaces that remain stable.
Why spraying and retaining wall waterproofing work together
A sprayed coating complements retaining wall and foundation waterproofing. As a retaining wall holds back both soil and water, protection needs to extend continuously across its surface.
Brushes and trowels can miss hollows or leave thin patches and gaps that let water through. Spraying reaches pores and irregular sections to avoid those weak points.
The right approach depends on the wall and what your property needs. After preparing the wall and concrete floor slab, we select a spray-applied system or pair it with a cavity drain membrane to suit the building.
Application by spray or by hand?
When is spray-applied waterproofing the best choice?
A thin patch can compromise any coating of tanking slurry. Spraying reaches places a brush or trowel may struggle with, helping the layer stay even across corners and walls.
The advantages of spraying
- Speed: quicker application than a brush or trowel means you can use your basement sooner.
- Even coverage: the coating stays consistent across the surface.
- Precision: slurry reaches into pores, gaps and irregular areas.
- No joints: the unbroken layer has no seams for water to enter.
Our approach to waterproofing
From preparation to sprayed waterproofing
Before we spray, we stop leaks, prepare a sound surface and seal the point where the wall meets the floor. That preparation helps the finished barrier last.
1
Survey and stopping active leaks
We find where water is coming through, remove plaster where needed and seal leaks with fast-setting hydraulic plugging mortar, so the slurry goes onto a wall that is no longer running with water.
2

Preparing the surface
Unsound plaster, paint and salt deposits are removed before we repair cracks. The surface is left clean, sound and damp, without standing water.
3
Renewing damaged mortar
Where mortar in the masonry is crumbling or delaminating, we replace the damaged sections, ideally throughout the wall, to give the slurry a firm base for bonding.
4
Sealing the wall-to-floor junction
The wall-to-floor joint is a basement's most vulnerable point. Before the main coats are applied, we form a fillet there or embed flexible sealing tape.
5



Spraying the slurry
At least two coats of slurry are sprayed to around 2–3 mm in total. We allow the first to set before adding the second, producing an even, continuous layer across walls, piers and returns.
6

Protecting the floor
For a basement that will be used, we cover the waterproofed floor with protective screed. It helps prevent damage to the barrier as the room is finished and occupied.
Waterproofing on either side of the building
We waterproof walls internally and externally where outside access is reasonably possible. On the exterior, sprayed tanking and render systems protect lower walls and plinths from ground moisture, rain and splashback. If damp rises from the ground, we combine this work with a damp proof course.
Protecting the surrounding area
While spraying, we cover nearby floors, windows, fittings and ground to minimise dust and overspray. We ventilate the work area and use appropriate respiratory protection because damp walls may carry mould spores that are harmful to breathe.
Using your finished basement
A dry basement with more possibilities
Once dry and waterproofed, a basement or lower ground floor could be used as a kitchen, living room, gym or home office. This usable space may add value to your property, and we can plan the complete basement conversion with you.



The materials we use
Established manufacturers and quality materials
Products from well-known manufacturers, including Wykamol, Delta, Newton, Biokil and Mapei, are used together as one complete system to keep your basement dry for years to come.

Wykamol
Waterproofing membranes, sump pumps and tanking slurries.
NEWTON
Newton
Membrane systems alongside waterproof coatings.

Delta
Protective membranes and drainage membranes.

Biokil
Mould treatments alongside damp proofing.
Mapei
Repair materials and waterproof mortars.
Other services
Services to complement sprayed basement waterproofing
Our other services can complement sprayed tanking; for an overview of the systems available, explore basement waterproofing technology.
Basement Waterproofing
Pumps, membranes and tanking.
Retaining Wall & Foundation Waterproofing
Waterproof barriers for walls retaining soil.
Structural Cracks Repair
Crack repairs ahead of wall coating.
Crystalline DPC Injections
Damp proof courses against rising damp.
Basement Conversion & Waterproofing
Planning alongside the building's structure.
Waterproof Render Interior & Exterior
Render that protects exposed walls.
Sump Pump System & Services
Pumping water away where necessary.
Basement Floor & XPS Insulation
Dry basements with warmer floors.
Basement Waterproofing Technology
An explanation of Type A, B and C.
Cellar Waterproofing
Dry conditions for older cellars.
Vault Waterproofing
Vaults below pavement level.
Insurance-Backed Guarantee & Product Warranty
Cover transferable upon sale.
What our clients say
Feedback from Crystal Damp Proofing & Basements clients, as published on our testimonials page.
I would always recommend Lukasz as their Crystal Injection system finally resolved the problem with rising damp. Need to mention that previous cream injections failed and the previous contractor refused responsibility to return. After 12 days walls are nearly dry as pepper!
Don’t often give reviews, but after several botched attempts to fix the damp problem in our flat by other companies and spending a considerable amount of money, Lucasz finally managed to solve the problem. There were multiple issues & Lukasz sorted them all out, from a dodgy DPC, damaged render, installing additional ventilation etc. So big thanks for finally getting rid of all that horrible black mould.
I am really happy with the work they did for our 4-bed house in South London. I will certainly be recommending Crystal Damp Proofing & Basements Ltd to anyone who has problems with condensation or damp!
Your questions answered
Questions about spray-applied basement waterproofing
How does spray-applied basement waterproofing work?
A machine applies tanking slurry, a polymer-modified, cement-based waterproofing mortar, to walls and floors rather than using a brush or trowel. It bonds permanently to the surface, creating a continuous barrier against ground moisture and water pressure. Under BS 8102:2022, this is a Type A barrier system.
How does spraying compare with applying tanking slurry by hand?
The material does the same job, but spraying applies it faster and more evenly, drives it deep into pores and gaps, and leaves one continuous coating with no joints. On large, uneven or hard-to-reach walls, that removes the thin and missed areas where water usually gets in.
How thick is the coating, and how many coats are sprayed?
We apply at least two sprayed coats of slurry, totalling around 2–3 mm. After the first coat sets, the second builds on it to form a continuous barrier.
Can I plaster, tile or decorate the walls later?
Yes. Once cured, breathable tanking slurry can be plastered or tiled over. Shelves, sockets and other fixings need planning to avoid puncturing the barrier; we will advise you before the room is finished.
Is spray-applied waterproofing suitable for external walls?
Yes, where exterior access reasonably allows. We spray tanking and render systems on lower walls and plinths to protect against rain, splashback and ground moisture. For rising damp, we combine this with a damp proof course.
Will spray-applied tanking alone suit a habitable basement?
That depends on the wall and the intended use of the space. Once we have prepared the walls and floor slab, we choose a spray-applied system or combine it with a cavity drain membrane, designed to BS 8102:2022 for the building.
Which guarantees come with the work?
Our work carries a 10-year workmanship guarantee and a QANW Insurance Backed Guarantee that passes to the new owner if you sell your property. Waterproofing materials also have a 10-year product warranty.
How can I arrange a survey in Croydon?
Arrange a survey online or call our specialists on 020 8432 3350 or 07720 752231. We will inspect the walls, identify where water enters and suggest the right spray-applied system.
Survey at no cost
Arrange a spray-applied waterproofing survey in Croydon
If your basement walls are damp, contact us for an initial survey. We will assess what we find and recommend either suitable spray-applied waterproofing or another way to protect your property from damp and water. Book a survey or speak to our specialists on 020 8432 3350 or 07720 752231.
07720 752231
Describe your basement walls
Please fill in the fields marked *. When we receive your details, we will get in touch to arrange the survey.
Looking at your property
Our first checks for damp basement walls in Croydon
What the wall is made of
How water gets in
Access to either side
Space for the work
Across Croydon, basements and lower ground floors can range from older brick or stone cellars to modern concrete structures. We inspect the actual walls before advising on a spray-applied system rather than assuming that properties in one area need the same treatment.
During the survey, we identify the wall material, how and where water enters, any active leaks that need stopping and whether we can reach the outside. These findings guide surface preparation, slurry selection and the decision on combining it with a membrane.
What to consider before spraying in Croydon
Every spray-applied basement waterproofing job in Croydon involves practical preparation.
- Access for the equipment: the pump and hoses need an unobstructed route and working space near the walls.
- Protection and ventilation: we cover fittings, windows and floors while keeping air moving during spraying.
- Time to cure: the first coat must set before the next is sprayed; plastering or tiling waits until the finished coating has cured.
- Fixings and finishes: planning sockets, shelves and fittings helps keep the completed barrier intact.
- Nearby areas: our spray-applied waterproofing work also extends to Norbury, Mitcham and Purley.

Preparing to spray

Help with your concerns about damp
Our 5-star Google rating makes us proud. Arrange a survey, explore our reviews or speak to a specialist on 020 8432 3350.
Qualified Specialists & a 10-Year Guarantee
Our family-run team holds CSSW qualifications, with a minimum of 10 years’ experience each. We back every job in Croydon with a 10-year guarantee covering workmanship, plus a QANW Insurance Backed Guarantee that transfers to the new owner if you sell your property. We work on domestic and commercial properties in Croydon and across London and the South East.
See What Our Clients Say
★★★★★ Rated 5 stars on Google
We are proud of our 5-star Google rating: see our reviews. If your basement or property in Croydon is damp or takes in water, book a survey in our Booking Survey section, or call or message our fully qualified advisors.
Where we work
Basement spray waterproofing near Croydon
For spray-applied basement waterproofing across Croydon and surrounding areas, including Norbury, Mitcham and Purley, turn to Crystal Damp Proofing & Basements Ltd. Select an area below to explore its local page.






