Leave your details and our team will get in touch.
Request a call back
Spray-Applied Basement Waterproofing in Richmond
Sprayed tanking slurry creates a fast, seamless, watertight barrier.
Damp on basement walls or ceilings can indicate that the original damp proofing was installed poorly or has deteriorated. If water is entering from the surrounding ground, paint alone will not help: the wall needs a continuous waterproof barrier.
For homes in Richmond TW9, Crystal Damp Proofing & Basements Ltd provides spray-applied basement waterproofing. Our CSSW-qualified team uses a machine to apply tanking slurry as a single seamless coat, without weak spots, inside or outside where access makes the work reasonably possible.
What is tanking slurry?
Tanking slurry is a polymer-modified, cement-based mineral waterproofing mortar. Applied in thin coats totalling 2–4 mm, it bonds permanently to walls or floors, creating a seamless barrier against ground moisture and water pressure. Under BS 8102:2022, it is a Type A barrier system.
The coating remains breathable, suits masonry and concrete, and can be tiled over.
- Flexible slurry bridges hairline cracks and allows for small structural movements.
- Rigid slurry suits solid surfaces that remain stable.
How spraying supports retaining wall waterproofing
Spray application and retaining wall and foundation waterproofing go hand in hand. Because a retaining wall holds back soil and water, its waterproof barrier must cover the entire surface continuously.
Applying a barrier by hand can leave thin patches in hollows and gaps where water may enter. Spraying reaches uneven sections and fills pores, helping to avoid those missed areas.
The wall and your needs determine the approach. After preparing the wall and concrete floor slab, we select a suitable spray-applied system or combine it with a cavity drain membrane for the building.
Sprayed or applied by hand?
When should waterproofing be spray-applied?
The thinnest patch determines how effective tanking slurry will be. Spraying reaches places that are awkward for a brush or trowel and helps maintain an even coating across corners and walls.
Benefits of spray application
- Speed: application is much quicker than using a brush or trowel, helping you use the basement sooner.
- Even coverage: the material forms a consistent layer over the surface.
- Precision: slurry reaches into pores, gaps and irregular sections.
- No joints: a continuous coating leaves no seams for water to follow.
Our approach to the work
The spray-applied waterproofing process
Spraying comes after essential preparation. We stop leaks, make sure the surface is sound and seal the wall-to-floor junction so the finished barrier can last.
1
Survey and stopping active leaks
We identify where water enters, take off plaster where necessary and stop active leaks with fast-setting hydraulic plugging mortar. This prevents running water from affecting the wall before slurry is applied.
2

Preparing the surface
We strip away unsound plaster, paint and salt deposits, repair cracks, then leave a clean, sound, damp surface without standing water.
3
Renewing damaged mortar
Where masonry mortar is crumbling or separating, we replace damaged sections, ideally across the entire wall, to give the slurry a firm surface to bond with.
4
Protecting the wall-to-floor junction
The junction where the basement wall meets the floor is particularly vulnerable. Before applying the main coats, we form a fillet or embed flexible sealing tape along this joint.
5



Applying the slurry by spray
We spray at least two coats of slurry to a total thickness of around 2–3 mm. Once the first coat has set, we apply the second to form a continuous, even barrier across walls, piers and returns.
6

Protecting the floor
If you intend to use the basement as a room, we cover its waterproofed floor with a protective screed. This helps prevent damage to the barrier during finishing and everyday use.
Waterproofing inside and outside
We can waterproof walls internally and, where reasonably accessible, externally. Outside, sprayed tanking and render systems protect lower walls and plinths against rain, splashback and ground moisture. If damp is rising from the ground, we combine the work with a damp proof course.
Protecting the surrounding area
Before spraying, we cover nearby windows, floors, fittings and ground, keeping dust and overspray to a minimum. We ventilate the work area and wear appropriate respiratory protection, as damp walls can carry mould spores that are harmful to breathe.
Making use of the space
A dry basement with room for more
Once waterproofed and dry, a basement or lower ground floor can serve as a living room, kitchen, home office or gym. Usable space can also add value to your home, and we can help plan the full basement conversion.



Our materials
Proven products from established manufacturers
Our chosen products come from well-known manufacturers including Wykamol, Delta, Newton, Biokil and Mapei. We use them together as a complete system intended to keep your basement dry for years.

Wykamol
Slurry tanking, waterproofing membranes and sump pumps.
NEWTON
Newton
Membrane systems and waterproof coatings.

Delta
Membranes for drainage and protection.

Biokil
Treatments for mould and damp proofing.
Mapei
Repair products and waterproof mortars.
Complementary services
Services that work alongside spray-applied waterproofing
Sprayed tanking can form part of a wider approach alongside our other services; explore basement waterproofing technology for an overview of the systems we use.
Basement Waterproofing
Tanking, membranes and pumps.
Retaining Wall & Foundation Waterproofing
Water barriers for soil-retaining walls.
Structural Cracks Repair
Repairing walls before they are coated.
Crystalline DPC Injections
Damp proof courses to address rising damp.
Basement Conversion & Waterproofing
Waterproofing planned around the structure.
Waterproof Render Interior & Exterior
Protective render for exposed walls.
Sump Pump System & Services
Pumping water away when needed.
Basement Floor & XPS Insulation
Insulated floors for dry basements.
Basement Waterproofing Technology
Understanding Type A, B and C.
Cellar Waterproofing
Keeping older cellars dry.
Vault Waterproofing
Waterproofing vaults beneath pavements.
Insurance-Backed Guarantee & Product Warranty
Cover transferable when you sell.
What our clients say
Feedback from Crystal Damp Proofing & Basements clients, as published on our testimonials page.
I would always recommend Lukasz as their Crystal Injection system finally resolved the problem with rising damp. Need to mention that previous cream injections failed and the previous contractor refused responsibility to return. After 12 days walls are nearly dry as pepper!
Don’t often give reviews, but after several botched attempts to fix the damp problem in our flat by other companies and spending a considerable amount of money, Lucasz finally managed to solve the problem. There were multiple issues & Lukasz sorted them all out, from a dodgy DPC, damaged render, installing additional ventilation etc. So big thanks for finally getting rid of all that horrible black mould.
I am really happy with the work they did for our 4-bed house in South London. I will certainly be recommending Crystal Damp Proofing & Basements Ltd to anyone who has problems with condensation or damp!
Common questions
Spray-applied basement waterproofing FAQs
What does spray-applied basement waterproofing involve?
A machine applies tanking slurry, a polymer-modified cement-based waterproofing mortar, to walls and floors instead of using a brush or trowel. It bonds permanently to the surface, creating a seamless barrier against ground moisture and water pressure. Under BS 8102:2022, it is a Type A barrier system.
How does spraying compare with applying tanking slurry by hand?
The material does the same job, but spraying applies it faster and more evenly, drives it deep into pores and gaps, and leaves one continuous coating with no joints. On large, uneven or hard-to-reach walls, that removes the thin and missed areas where water usually gets in.
How thick is the coating, and how many coats are needed?
We apply at least two sprayed coats, around 2–3 mm thick in total. The first coat sets before the second is applied, building a single continuous barrier.
Can I plaster, tile or decorate the walls afterwards?
Yes. Once cured, breathable tanking slurry can be plastered or tiled over. We advise you on planning shelves, sockets and other fixings before finishing the room so they do not puncture the barrier.
Can waterproofing be sprayed on the outside of a building?
Yes, where the outside is reasonably accessible. We spray tanking and render systems on lower walls and plinths to protect against rain, splashback and ground moisture. For rising damp, we combine this with a damp proof course.
Will spray-applied tanking alone suit a habitable basement?
That depends on the wall and the intended use of the room. Once we have prepared the walls and floor slab, we choose a spray-applied system or combine it with a cavity drain membrane, designed to BS 8102:2022 for the building.
What guarantee comes with the work?
Our work has a 10-year workmanship guarantee and a QANW Insurance Backed Guarantee that passes to the new owner if you sell. The waterproofing materials also have a 10-year product warranty.
How can I arrange a survey in Richmond?
Book online or speak to our specialists on 020 8432 3350 or 07720 752231. We will inspect the walls, identify where water enters and recommend a suitable spray-applied system.
Free survey
Arrange a spray-applied waterproofing survey in Richmond
If your basement walls are damp, get in touch to arrange an initial survey. We will assess what we find and suggest either suitable spray-applied waterproofing or another way to protect your property from damp and water. Book online or call 020 8432 3350 or 07720 752231.
07720 752231
Describe your basement walls
Please complete the fields marked *. We will contact you to arrange a survey once we receive your details.
Assessing local properties
What we assess on damp basement walls in Richmond
Wall construction
Points of water entry
Internal or external access
Working space
Around Richmond, a basement or lower ground floor may be an older brick or stone cellar or a modern concrete structure. Rather than assume what a property needs from its location, we examine its walls before recommending spray-applied waterproofing.
Our survey looks at the wall material, where water is entering, whether active leaks need stopping and whether we can access the outside. This helps us decide how to prepare the surface, select the slurry and determine if a membrane should be included.
Preparing for sprayed waterproofing in Richmond
Several practical considerations shape a spray-applied basement waterproofing project in Richmond.
- Access for the equipment: the pump and hoses require a clear way through and enough room near the walls.
- Protection and ventilation: we cover windows, floors and fittings and ventilate the space during spraying.
- Time to cure: the initial coat must set before another is applied, and the finished coating must cure before plastering or tiling.
- Fixings and finishes: we plan shelves, sockets and fittings to avoid puncturing the completed barrier.
- Nearby areas: spray-applied waterproofing is also available in Twickenham, Kingston upon Thames and Hounslow.

Getting ready to spray

Get help with your damp concerns
We are proud to have a 5-star Google rating. Arrange a survey, browse our reviews or speak to our specialists on 020 8432 3350.
Qualified Specialists & a 10-Year Guarantee
Our family-run team holds CSSW qualifications, with a minimum of 10 years’ experience each. We back every job in Richmond with a 10-year guarantee covering workmanship, plus a QANW Insurance Backed Guarantee that transfers to the new owner if you sell your property. We work on domestic and commercial properties in Richmond and across London and the South East.
See What Our Clients Say
★★★★★ Rated 5 stars on Google
We are proud of our 5-star Google rating: see our reviews. If your basement or property in Richmond is damp or takes in water, book a survey in our Booking Survey section, or call or message our fully qualified advisors.
Our service area
Spray-applied basement waterproofing near Richmond
Crystal Damp Proofing & Basements Ltd provides spray-applied basement waterproofing throughout Richmond and nearby areas, including Twickenham, Kingston upon Thames and Hounslow. Select an area below to view its local page.






