Leave your details and our team will get in touch.
Request a call back
Basement Floor & XPS Insulation for Shalmsford Street
Make your basement walls and floor warmer and drier for everyday use.
The right basement floor insulation helps a below-ground room feel like part of the home: comfortable, dry and firm underfoot. Bare concrete remains cold throughout the year, draws warmth from the room and can encourage condensation and mould.
In Shalmsford Street CT4, Crystal Damp Proofing & Basements Ltd insulates basement floors and walls with extruded polystyrene (XPS) within a complete waterproofing system. We work on living rooms, bedrooms, home offices, gyms, cellars and other rooms below ground.
Spaces we insulate
For rooms below ground intended for daily use, XPS provides floor and wall insulation in:
- newly built basements and basement conversions
- cellars converted into home offices, living rooms or bedrooms
- playrooms, basement gyms and cinema rooms
- flats at lower-ground level
- vaults and other spaces below ground used every day
About the insulation
How does XPS work?
Extruded polystyrene (XPS) is a rigid board whose closed-cell structure provides the properties needed for demanding parts of a building, including basements.
Why not standard expanded polystyrene (EPS)? Wet ground causes ordinary EPS to absorb water and lose its ability to insulate. For below-ground use, especially with a high water table, XPS is the appropriate choice.
What floor insulation changes in a basement
When a concrete slab remains cold, the basement can feel unlike the rest of your home. Insulating it makes a difference in several ways:
- Comfort: the entire space may feel cold because of the slab, regardless of how much you heat it.
- Less condensation and mould: a warmer floor is less likely to collect moisture through condensation.
- Lower heating bills: insulation limits the warmth escaping into the ground.
- Building Regulations: a basement floor converted for living space has to satisfy the thermal requirements in Part L.
- Underfloor heating: placing insulation beneath the screed directs warmth into the room instead of the ground.
Choosing the insulation position
Inside and outside applications for XPS
Beneath a floor or on either side of a basement wall, XPS has a different role in each position. On phones, this side-by-side comparison displays as separate cards.
Externally
Retaining and foundation walls
- Moisture resistance: essential externally. Groundwater does not penetrate XPS, allowing it to continue insulating in wet ground.
- Mechanical strength: very high. The boards withstand frost heave and pressure from soil while protecting the waterproofing against damage.
- Thermal insulation: prevents freezing walls and eliminates cold bridges at the building-to-ground junction.
- Biostability: complete resistance to insects, bacteria, fungi and rot in soil.
Internally
Internal walls and ground-level floors
- Moisture resistance: a supporting feature. The board resists ground moisture, but still needs to be installed as part of proper waterproofing.
- Mechanical strength: high in floor applications, supporting heavy everyday loads and the flooring layers above.
- Thermal insulation: blocks cold rising from the ground through the floor. Insulating a wall internally calls for careful design.
- Biostability: resistance to fungi and mould matters particularly where a basement has poor ventilation.

External basement insulation: the recommended option
On the outer face of a basement wall, XPS insulates and forms a protective shield. It guards delicate waterproofing, including bituminous coatings on retaining walls, against plant and tree roots and sharp stones during backfilling.
- Fully bonded: instead of applying adhesive in dabs, we bond each board across its entire surface to the waterproofing. This stops water moving behind the boards between the wall and XPS.
- Rebated edges: our shiplap-edged boards fit without gaps that would let water wash through the insulation.
- Heavy-duty waterproofing first: at a high water table, a robust membrane or reinforced bituminous coating is applied directly to the wall, with XPS above it. XPS alone can remain permanently in groundwater without losing its insulating value.
The building matters
Insulation for new and existing basements
A basement already in place needs a different approach to insulation from one still under construction.
Newly constructed homes
For new homes we build with a basement, XPS is standard. We mainly fit it externally while the structure is accessible, which is the best way to install it:
- Foundation walls: available space outside allows us to bond boards of the thickness required by Part L directly onto the smooth new waterproofing.
- Protection during backfilling: XPS protects freshly applied waterproofing while heavy machinery backfills the excavation.
- Floors: smooth-edged or rebated boards go beneath the slab or screed. High compressive strength, for example 300 or 500 kPa, supports water tanks, boilers and heat pumps without the floor settling.
Older, existing properties
Restricted access, damp and irregular older masonry all influence how we work:
- Outside, by excavation: the most effective approach to drying an old basement and separating it from cold ground. We safeguard its foundations throughout, level uneven stone or brick with a render, apply new vertical waterproofing and bond the XPS.
- Inside, without excavation: an option when digging externally cannot be done, such as when permission is refused or a neighbouring building is too close.
- Floors in old basements: to avoid sacrificing limited ceiling height, an old damp floor often needs breaking out and the basement lowering before waterproofing and XPS go in. We coordinate this with the basement conversion.
XPS rather than standard PIR beneath a cavity drain membrane
A cavity drain membrane within a Type C system (BS 8102:2022) manages water entering through the structure. Consequently, moisture or even standing water may remain in the layers below it. Any insulation installed there must cope with those conditions:
- Moisture resistance: XPS takes up almost no water, does not rot and retains its insulating value even after prolonged exposure to wet conditions. Foil-faced PIR works excellently when dry, but ongoing damp can cause its facings to delaminate and its core to absorb moisture.
- Compressive strength: floor boards made of XPS typically have a rating of 300 kPa or more, supporting furniture, partition walls and screed without settling. We consider long-term creep alongside short-term strength because these loads stay in place for decades.
- Drainage: underside grooves on some XPS floor boards let water move freely towards perimeter drainage channels.
XPS insulates; waterproofing keeps the water out. Although it tolerates moisture, XPS lets water through joints between boards and is not one of the three protection types under BS 8102:2022. We therefore fit it within a complete system comprising the cavity drain membrane, perimeter drainage channels and a sump with an automatic pump to discharge water outside.
Floor layers in a Type C system
Our approach to an insulated basement floor
Our standard insulated basement floor is built in these stages:
- Survey: we inspect the slab, assess water level and available ceiling height, discuss your preferred finish and select the appropriate board thickness.
- Preparing the slab: we level and clean the floor, repair cracks and create perimeter drainage channels linked to the sump.
- XPS insulation: boards are tightly jointed directly on the concrete slab across the entire floor, with edge insulation beside walls to avoid cold bridges.
- Cavity drain membrane: we fit the floor membrane, seal its joints and link it with the wall membranes and drainage system.
- Screed and finish: the screed is laid, including underfloor heating if required, ready for your chosen floor finish.



When the water table is high
Insulating a basement floor at a high water table
With a high water table, groundwater presses continually against basement floors and walls and can force a floor upwards, making insulation particularly challenging. Board joints in XPS are not watertight, so the layers above and below matter. Depending on the building, we choose our Type C system or construct a sealed, tanked floor in stages:

Important: the completed floor needs enough weight to withstand upward water pressure. A structural engineer therefore determines the loading slab’s exact thickness and reinforcement; we never guess. If flexible mineral tanking slurry goes beneath XPS, we apply it in a single seamless layer.
Fitting insulation to internal basement walls
Where external wall access is unavailable, mainly in existing basements, internal insulation may be needed. Its design requires care:
- Stop the water first: if groundwater penetrates a wall, internal XPS could trap it, allowing moisture to accumulate, damage the wall and cause mould, although the board itself will not rot. We address the water first using crystalline DPC injection to create a barrier within the wall, mineral tanking slurry resistant to negative pressure, or a cavity drain membrane system.
- The dew point: installing insulation internally shifts it into the wall. Uncontrolled water vapour could then condense behind XPS and harm the masonry. We assess the risk carefully, use thermal imaging when needed and include vapour control where required.
- Rough-faced boards: for walls receiving adhesive and plaster, we select XPS with a rough or waffled face to improve adhesion substantially.
Products and materials
Quality materials from established manufacturers
High-quality XPS boards from our trusted waterproofing suppliers are combined with proven products from well-known manufacturers including Newton, Wykamol, Delta, Biokil and Mapei. As a complete system, they help keep your basement warm and dry for years to come.
NEWTON
Newton
Pumping systems and membranes for cavity drainage.

Wykamol
Sump pumps alongside membranes and tanking slurries.

Delta
Pumps and channels alongside studded membranes.

Biokil
Treatments for mould and damp proofing.
Mapei
Waterproof coatings paired with repair mortars.
More basement services
Work that supports an insulated basement floor
Alongside floor insulation, our work towards a dry, usable basement includes basement waterproofing, basement conversions and sump pump installation.
Waterproofing Basements
Drainage membranes, pumps and tanking.
Converting and Waterproofing Basements
Turn a damp cellar into a room for living.
Retaining Wall & Foundation Waterproofing
Shielding external walls ahead of backfill.
Sump Pump System & Services
Fitting pumps and maintaining them.
Spray-Applied Basement Waterproofing
Spray application of tanking slurry.
Cellar Waterproofing
Dry conditions for older cellars.
Crystalline DPC Injections
Damp proof courses installed in walls.
Thermal Inspection
Locating cold bridges and hidden damp.
Your questions answered
FAQs about basement floor insulation
What makes XPS preferable to EPS or PIR for a basement?
Insulation beneath ground level may face damp for decades. XPS takes up almost no water and continues to insulate when wet. Ordinary EPS absorbs water in wet soil; foil-faced PIR, while excellent in dry positions, can lose performance and delaminate if it stays damp, including beneath a cavity drain membrane.
Is XPS enough to waterproof my basement?
No. Although XPS tolerates moisture, water can move between its boards, and BS 8102:2022 does not recognise it as a waterproofing protection type. We fit it within a complete system: either a cavity drain membrane with drainage and sump pump, or a sealed, tanked floor.
What determines basement floor insulation thickness?
We consider the U-value specified by Part L, available ceiling height, screed type and whether underfloor heating is wanted. During the survey, we establish a build-up that meets Building Regulations without unnecessarily reducing headroom.
Does floor insulation take up basement headroom?
Together, the insulation, membrane and screed increase the floor level. Where a cellar ceiling is low, we coordinate these layers with the conversion and lower the floor if needed, keeping the room workable as living space.
Can underfloor heating be fitted in a basement?
Yes. We put XPS below the screed, with heating mats or pipes above the insulation. This sends warmth upwards into the room instead of down into the ground.
How do you insulate if the water table is high?
Our Type C system controls water using a membrane, drainage and pump. Alternatively, we construct a sealed, tanked floor with waterproofing beneath XPS, boards rated at least 300 kPa, a separating layer and a reinforced loading slab sized by a structural engineer.
Why are XPS boards kept covered during installation?
Both XPS boards and membranes are sensitive to sunlight. In a completed floor they are entirely in the dark, but boards exposed to sun for weeks beforehand may yellow and become brittle at the surface. We keep materials covered in storage and fit the membrane and screed above the insulation without unnecessary delay.
Where can I arrange a basement survey in Shalmsford Street?
Arrange your survey online or speak to our specialists on 020 8432 3350 or 07720 752231. We check the slab, water conditions and headroom, then recommend an appropriate floor build-up.
Survey at no cost
Arrange your Shalmsford Street basement survey
For a basement floor that feels damp or cold, arrange a survey or phone our specialists on 020 8432 3350 or 07720 752231. We will assess the slab and water conditions before recommending suitable insulation and waterproofing.
07720 752231
Describe your basement
Please complete the required fields marked *. We will get in touch to arrange the survey once your details have arrived.
Assessing the local property
Our first checks for basements in Shalmsford Street
Whether a basement in Shalmsford Street is an older cellar or a newly built space, we begin with its own condition. A floor build-up should reflect the room itself, not assumptions based on its address.
We examine the walls and slab, available headroom and intended use, and find out whether water appears only after rain or remains present. What we find determines whether a Type C or sealed, tanked floor is appropriate, along with board thickness and strength.
Consider headroom before the floor is built
A membrane, screed and insulation all add to the finished floor height. In a low-ceilinged cellar in Shalmsford Street, the remaining headroom may determine whether a living space satisfies Building Regulations.
- Plan it with the conversion: if the room is to become an office, gym or bedroom, consider the floor layers and any necessary lowering as part of the conversion, before a lack of headroom becomes a problem.
- How thick should the insulation be? That depends on the U-value required by Part L, ceiling height, screed type and whether underfloor heating is wanted. At the survey, we set a build-up that meets Building Regulations without taking unnecessary height.
- One team, one plan: we coordinate the conversion, waterproofing and insulation as a single project with our architects and engineers.
- Nearby areas: our basement floor insulation work also extends to Canterbury, St Dunstan's, Aylesham and Sellindge.

Getting your project started

Let us make your basement warm and dry underfoot
We are proud to have a 5-star Google rating. Arrange a survey, look through our reviews or speak to our specialists on 020 8432 3350.
Qualified Specialists & a 10-Year Guarantee
Our family-run team holds CSSW qualifications, with a minimum of 10 years’ experience each. We back our work in Shalmsford Street with a 10-year guarantee covering workmanship, plus a QANW Insurance Backed Guarantee that transfers to the new owner if you sell your property. The waterproofing materials also carry a 10-year product warranty. Based in Croydon, we work on domestic and commercial properties across London and the South East.
See What Our Clients Say
We are proud of our 5-star Google rating. If you want a warm, dry basement floor, book a survey or call our specialists on 020 8432 3350 or 07720 752231.
Where we provide this service
Insulated basement floors in and around Shalmsford Street
For basement floor insulation, Crystal Damp Proofing & Basements Ltd works in Shalmsford Street and nearby areas including Canterbury, St Dunstan's, Aylesham and Sellindge. Select an area below to view its local page.








