Leave your details and our team will get in touch.
Request a call back
Basement Waterproofing for Richmond Homes
Make your damp basement a dry space you can use.
In Richmond, a basement can offer valuable space, but groundwater and heavy rain may allow moisture through foundation walls. The result can be structural damage, mould and a room you cannot use.
For basement waterproofing in Richmond TW9, Crystal Damp Proofing & Basements Ltd brings together specialists qualified to CSSW, each with at least 10 years’ experience. We install robust, guaranteed basement waterproofing in Richmond designed to keep moisture out for good.
- Drained cavity membrane systems (Type C)
- Masonry protection using structural tanking slurry (Type A)
- Bitumen coatings and spray-applied tanking

10+
Years of experience per specialist
Waterproofing methods
Waterproofing systems chosen for your basement
The right approach depends on the property and its surroundings. Our specialists assess both before selecting from three proven waterproofing methods, which can also work together.
1


Cavity drain membrane systems
The solution we use most often. Rather than relying on a barrier alone, this system controls where water goes. We fit studded membranes to the walls and floor, allowing groundwater that passes through the outer masonry to drain behind them. Concealed channels carry it to a high-performance sump pump, which pumps it away.
This creates a dry, warm area immediately ready for plaster, decoration or a complete basement conversion. BS 8102:2022 calls the approach Type C (drained) protection.
2


Structural tanking with slurry coatings
When the structure is suitable, advanced tanking slurries bond to the masonry to create a durable waterproof barrier. This is Type A (barrier) protection under BS 8102:2022. Small cracks can undermine standard slurry, so preparation is essential:
- First, we strip the walls and clean the exposed substrate.
- Next, we make good visible cracks and faulty mortar, including structural crack repair where required.
- Specialist primers then help stabilise the prepared surface.
- Finally, carefully applied coats of waterproof tanking render create a continuous moisture seal.
3

Spray-applied tanking and bitumen coatings
For extensive surfaces and external structures, spray-applied tanking helps us achieve an even coating of consistent thickness. Spraying also reaches irregular surfaces and awkward areas without leaving thin patches or gaps.
- Preparing the surface: we use specialist levelling and repair mortars, including universal mortar, to repair and even out the substrate before spraying. This gives the coating the sound surface it needs to perform as intended.
- External bitumen protection: bituminous coatings can be sprayed onto the outside of retaining walls and foundations and other earth-retaining structures before backfilling, stopping groundwater before it reaches the structure.
- A combined approach: we can pair external spray-applied tanking with an internal cavity drain membrane for full A + C protection.
Helpful answers
Common basement waterproofing questions
Why are specialist systems needed below ground?
Soil remains in contact with below-ground floors and walls. Heavy rainfall, or a high water table, can also force water against them; this is hydrostatic pressure. Damp proofing intended for walls above ground cannot withstand that pressure. BS 8102:2022, the British Standard covering protection of below-ground structures, therefore specifies dedicated waterproofing approaches.
• Cavity drain membranes provide a managed exit for water rather than resisting its pressure. This prevents pressure building behind the finished wall, making them the safest option for habitable rooms and places with a high water table.
• Tanking slurry adheres to masonry to stop water at its surface. It suits sound, solid walls, lower-risk locations, lightwells and external walls, or rooms where conserving every millimetre matters.
• Combined systems (A + C) use slurry as the initial barrier and a membrane as a second line of protection should water pass through. We often use them for new basements and complete conversions. BS 8102 recommends combined protection when risk is greater or the room is intended for living in.
What lifespan can I expect from the waterproofing systems?
• Cavity drain membranes use high-density polyethylene (HDPE), a material that does not rot and withstands salts, chemicals and mould. When properly installed, a membrane is designed to provide decades of service.
• Sump pumps have moving parts and require attention. Depending on system size, we usually recommend servicing every 6 months. A pump cared for properly normally operates for many years; a dual pump or battery back-up maintains operation through a power cut.
• Tanking slurry is cement-based and can last decades on stable masonry that has been prepared correctly. Because the underlying wall affects its lifespan, we address cracks and prepare the substrate thoroughly before coating it.
• External sprayed bitumen coatings sit beneath backfill after the ground has been reinstated. Protected by a board, they can last for decades without maintenance.
Checks and pump servicing help the system perform as well in 20 years as it did when installed. Our aftercare packages support this.
What happens to my basement walls and floor?
• Walls: an internal cavity drain membrane keeps damp masonry separate from the room; it does not dry the masonry itself. Moisture passes down the gap behind it into drainage, preventing water pressure from pushing the membrane away. Finishes can include plasterboard fixed to battens or by dot-and-dab, or plaster applied directly to a mesh membrane.
• Floors: we place a floor membrane over the existing slab and link it to drainage channels around the perimeter. Screed or a floating floor then provides a base for carpet, laminate or tiles. This normally uses only a few centimetres of headroom, which we account for during the survey. XPS insulation can be added for warmth.
• Tanked walls: slurry adds very little depth because it bonds to the wall. Holding water back at the surface means it needs sound masonry, so we make good cracks and other defects first.
• The building: both approaches guard against continuing water damage, including corroding steel, frost damage, salt marks and mould. They also allow insulation and a warm, healthy finish.
Which guarantees apply, and how long do they run?
Yes. We provide a guarantee with each waterproofing system we install:
• Workmanship: our company’s written installation guarantee lasts 10 years.
• Insurance Backed Guarantee (IBG): arranged through QANW, this policy protects the guarantee if the installer ceases trading. It runs for 10 years, passes to a new owner on sale and is often requested by mortgage lenders and buyers’ surveyors.
• Product warranty: our waterproofing materials have a manufacturer’s warranty of 10-year, also called a product warranty.
• Pump warranty and servicing: the manufacturer covers sump pumps for up to 2 years. Regular servicing is needed to keep the pump warranty and system guarantee in force.
Your written quotation explains the guarantees relevant to your project and what they cover from the outset.
How can I arrange a damp survey in Richmond?
Use the short form here or telephone our specialists on 020 8432 3350 or 07720 752231. We will arrange a survey to identify the source of damp, followed by a written quotation explaining the proposed system and applicable guarantees.
Product manufacturers
Proven products from leading manufacturers
Protecting your home calls for products chosen with care. Crystal Damp Proofing & Basements Ltd uses proven materials from leading manufacturers, selecting what suits the individual building rather than applying the same system everywhere.

Wykamol
Tanking slurries, sump pumps and cavity drain membranes.
NEWTON
Newton
Pumps and drainage for cavity drain membrane systems.

Delta
Studded wall and floor membranes with high performance.
Mapei
Repair mortars, levelling materials and waterproofing coatings.

Biokil
Products for damp proofing and protecting property.
Signs of damp
When should you waterproof your basement?
Acting on basement damp can help prevent costly structural problems. An older home without protection in its foundations, or a property in an area with a high water table, may be particularly vulnerable.
Our specialists investigate the source before recommending a solution. Possible causes include penetrating damp, rising damp, inadequate insulation and poor rainwater drainage. For moisture you cannot see, we use thermal imaging.

Project examples
Basement waterproofing projects in pictures
Browse photographs of our basement waterproofing work, including lined vaults, installed sumps and lightwells being built.



Complementary services
Further protection for below-ground rooms
Our other specialist services can complement waterproofing; to understand the systems in more detail, visit our basement waterproofing technology page.
Basement Waterproofing Technology
Understand Type A alongside B and C.
Basement Conversion & Waterproofing
Turn a damp cellar into usable living space.
Spray-Applied Basement Waterproofing
Consistent coverage across larger surfaces.
Retaining Wall & Foundation Waterproofing
Protect external walls ahead of backfilling.
Sump Pump System & Services
Sump pump installation and ongoing servicing.
Structural Cracks Repair
Repair walls before tanking is applied.
Basement Floor & XPS Insulation
Insulate over the slab for a warmer floor.
Iso-Therm Membrane & Black Mould
Lining for walls affected by cold and mould.
Thermal Inspection
Find damp that is not readily visible.
Penetrating Damp
Address moisture entering through walls.
Rising Damp
Tackle ground moisture travelling upwards.
Insurance-Backed Guarantee & Product Warranty
Protection transferable when the home is sold.
What our clients say
Feedback from Crystal Damp Proofing & Basements clients, as published on our testimonials page.
They carried out basement damp-proofing for us and did a fantastic job. I had a lot of issues with damp and the basement was in very poor condition, but fortunately I found this company. […] Well done — I highly recommend them.
Although we had cheaper quotes, the quality Crystal delivered was on another level — worth every penny. They were friendly, reliable, and exceptionally thorough.
To Whom it may concern, I would like to say a huge thank you to Lukasz and his team who carried out the damp proofing at my house. Their work can only be described as professional, quick and hassle-free. House was cleaned each day, all rubbish was taken away.
Free damp survey
Arrange your damp survey in Richmond
Ready to address your damp basement? Send the quick form to request a damp survey, or speak with our specialists on 020 8432 3350 or 07720 752231.
07720 752231
Request your damp survey
Please complete all fields marked *. When we receive your details, we will get in touch to arrange the survey.
The local picture
Choosing basement waterproofing in Richmond
Water pressure
Existing foundations
Lightwell access
Assess before installing
A basement near the Thames in Richmond still needs an assessment of the building itself, not an assumption about local ground conditions. Moisture might remain present over time or appear after heavy rain; an older property may also lack protection at foundation level. We inspect before deciding what system to use.
At the survey, we check where damp shows, how the floor and walls are constructed and whether the weather affects the problem. Access to a lightwell or outside wall may make an external coating useful, while anticipated water pressure may point towards an internal drained system.
Your written quotation explains the recommendation, whether that is a cavity drain membrane, tanking slurry or both working together.
Your basement waterproofing project in Richmond
Here is how a basement waterproofing project in Richmond runs from start to finish.
- Survey: we identify the source of damp and use thermal imaging to locate hidden moisture.
- Written quotation: you receive a clear recommendation and details of the applicable guarantees.
- Preparation: we strip walls, repair cracks and level surfaces before installing the system.
- Installation: our own specialists fit membranes, tanking or spray-applied coatings.
- Aftercare: regular pump servicing helps maintain performance. We also cover Twickenham, Kingston upon Thames and Hounslow.

A considered approach

Start making your basement dry and usable
Arrange your damp survey online or speak to a specialist on 020 8432 3350.
Qualified Specialists & a 10-Year Guarantee
Our family-run team holds CSSW qualifications, with a minimum of 10 years’ experience each. We back every job in Richmond with a 10-year guarantee covering workmanship, plus a QANW Insurance Backed Guarantee that transfers to the new owner if you sell your property. We work on domestic and commercial properties in Richmond and across London and the South East.
See What Our Clients Say
★★★★★ Rated 5 stars on Google
We are proud of our 5-star Google rating: see our reviews. If your basement or property in Richmond is damp or takes in water, book a survey in our Booking Survey section, or call or message our fully qualified advisors.
Our service area
Basement waterproofing in Richmond and beyond
For basements, cellars and vaults across Richmond and surrounding areas, Crystal Damp Proofing & Basements Ltd provides waterproofing services. We also cover Twickenham, Kingston upon Thames and Hounslow; select an area below to view its local page.




